ALUMINUM FIXTURE PLATE FOR MINI MILLS

This fixture plate is ideal for all mini mills such as Sherline, Taig, Grizzly etc.  it is made of stock 6061 aluminum plate with 48 drilled and tapped  6 MM x 1.0 holes spaced on .75" centers for an unlimited variety of clamping  possibilities.  The plate also has 6 drilled and countersunk 8 MM holes so your clamping bolts are flush to the surface.  The mounting holes are spaces at 1.6" on center. The plate comes with  4 T nuts and mounting bolts.  The weight is 1.5 #.  The plate is made of standard aluminum plate stock with the normal variations in thickness, and can be ground by the owner to higher degrees of tolerance  according to your preference.

SPECIFICATIONS

WIDTH                               4"

LENGTH                             8"

THICKNESS                       1/2"

WEIGHT                            4 #

MOUNTING POINTS          6     3 ACROSS EACH END  SPACED ON 1.5" CENTERS

MOUNTING HARDWARE   6 T NUTS WITH 16 MM (5/8") BASE WIDTH AND 10 MM TOP SLOT WIDTH  TAPPED TO 8 MM X 1.25  WITH INCLUDED SOCKET CAP SCREWS

FIXTURING HOLES           48    TAPPED 6MM X 1   EQUALLY SPACED IN 5 ROWS OF 8  PLUS 2 END ROWS OF 4 EACH