GENERAL DIMENSIONS SPECIFICATIONS
LATHE
| DEPTH |
30 “ |
| WIDTH |
52″ |
| HEIGHT |
82″ +/ – 1″ FOR LEG LEVELERS ASSEMBLED |
| SHIPPING WEIGHT |
1250 # |
| MACHINE WEIGHT |
1200 # INCLUDES BENCH |
| CRATE SIZE |
52″W x 32″D x 44″H |
| FOOTPRINT |
54″ WIDE X 30″DEEP X 84″ TALL (ADD 24″ WIDE FOR PC) |
| T SLOT SIZE |
1/2″ |
| POWER FEED X AXIS |
YES forward and reverse with CNC or Power feed |
| POWER FEED Y AXIS |
YES forward and reverse with CNC or Power feed |
| POWER FEED Z AXIS |
YES up and down with CNC or Power feed |
| TABLE SIZE |
9″ X 19″ |
| T SLOTS ON TABLE 3 |
FULL LENGTH EQUALLY SPACED 2.375" OC |
| DISTANCE BETWEEN CENTERS |
30″ |
| DIAL CALIBRATION ON CROSSFEED |
DRO STANDARD INCH/METRIC READING |
| DIAL CALIBRATION ON LEADSCREW |
DRO STANDARD INCH/METRIC READING |
| DIAL CALIBRATION ON MILL HEAD |
DRO STANDARD INCH/METRIC READING |
| FEED RATES ON X AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
| FEED RATE ON Y AXIS |
ADJUSTABLE 0-100 IPM UNDER CNC or Power feed |
| FEED RATE ON Z AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
| HEADSTOCK TAPER |
MORSE # 5 |
| LATHE CHUCK BORE |
1.59″ |
| LATHE CHUCK DIAMETER |
6″ |
| LATHE CHUCK MAX WORK PIECE DIA. |
6.32″ |
| LATHE CHUCK MINIMUM WORKPIECE |
0.125″ ( practical limit) |
| LATHE CHUCK MOUNT |
PLAIN BACK |
| LATHE CHUCK TYPE |
3 JAW SELF CENTERING |
| SPINDLE ACCURACY T.I.R. |
0.00076″ |
| SPINDLE BORE |
1.59″ |
| SPINDLE SPEEDS |
0-1650 |
| SWING OVER BED |
17″ |
| SWING OVER CARRIAGE |
7.5″ |
| TAILSTOCK TAPER |
MORSE # 3 |
| TAILSTOCK BARREL TRAVEL |
6.25″ PLUS 4″ TELESCOPING total 10.25" |
| THREADS – INCH |
INFINITE |
| THREADS- METRIC |
INFINITE |
| X AXIS TRAVEL |
10″ 5" FORWARD AND BACK FROM CENTER |
| TOOL BIT SIZE |
0.125″ TO 0.50″ |
| Z AXIS TRAVEL WITH TAILSTOCK ON |
16.5″ |
| Z AXIS TRAVEL WITH TAILSTOCK OFF |
16.5″ |
| OPTIONAL STEADY REST |
2.5″ MAX DIAMETER |
| OPTIONAL FOLLOW REST |
1.5″ MAX DIAMETER |
MILL
| SUPPORT COLUMNS – 6 1.25″ GROUND |
7.50″ TOTAL DIAMETER |
| MILL HEAD TRAVELS ON LINEAR BEARINGS |
|
| DRAWBAR BT-30 GRIPPER |
8.0″ WITH SPINDLE CENTERING BUSHING |
| DRILL CHUCK |
0-1/2″ |
| DRILL CHUCK ARBORS 2 |
BT-30 AND MORSE # 3 |
| FEED RATES MILL X AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
| FEED RATE MILL Y AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
| FEED RATE MILL/DRILL Z AXIS |
ADJUSTABLE 0-100 IPM UNDER CNC or power feed |
| MILL HEAD SPINDLE TO LATHE SPINDLE TRAM |
0.001″ |
| Z AXIS TRAVEL |
10.5″ |
| BT-30 TOOL HOLDER WITH ER20 COLLET |
|
| SPINDLE CENTER TO FRONT OF LATHE CHUCK |
12″ |
| SPINDLE CENTER TO LATHE SPINDLE FLANGE |
14.75″ |
| SPINDLE CENTER TO SUPPORT COLUMN |
16.5″ |
| SPINDLE TO TABLE DISTANCE |
2′-15″ |
| SPINDLE SPEEDS |
0-4750 |
| SPINDLE TAPER |
BT-30 |
| TOOL SIZE LIMITS ( END MILLS/DRILL) |
1″ recommended |
| X AXIS TRAVEL |
16.5″ (8.25″ right and left from center) |
| Y AXIS TRAVEL |
10″ (5″ forward and back from center) |
| |
|
ELECTRICAL
| MOTORS (2) 220 VOLT 60 HZ TEFC |
10 AMPS EACH 4 POLE INVERTER DUTY |
| HORSEPOWER |
2.75 rated at max VFD torque compensation |
| PHASE |
INPUT 220 VOLT SINGLE PHASE- OUTPUT 220 VOLT 3 PHASE |
| POWER CORDS |
1 12 GUAGE NEMA 6-15 PLUG |
| POWER REQUIREMENT 220 VOLT |
HOUSEHOLD OUTLET 20 AMP CIRCUIT |
| MOTOR MOUNTING FRAME |
IEC 100 face mount |
| MOTOR SHAFT SIZE |
24 mm ( 15/16″) |
| MOTOR RPM |
1680 @ 60Hz adjustable through VFD to 120 Hz=3660 |
| INVERTER 220 VOLT SINGLE PHASE INPUT 220 VOLT 3 PHASE OUTPUT | |
| STEPPER MOTORS NEMA 34 410 OZ/IN on X and Y 820 OZ/IN on Z ( dual motors) | |
| CNC DRIVER GECKO 540 WITH 4 AXIS OUTPUTS AND 3 PRE-WIRED INPUT PLUGS | |
| COMPUTER 32 BIT INDUSTRIAL WITH 14" TOUCH SCREEN,MOUSE, KEYBOARD WIN 7 AND MACH 3 SOFTWARE PRE-LOADED | |
OTHER
| BENCH- ALL STEEL WELDED CONSTRUCTION |
6 LEGS WITH ADJUSTABLE LEVELING PADS AND 4 CASTERS FOR MOVING BUILT IN DRIP TRAY FOR COOLANT SYSTEM |
| DRO MOUNTING |
ALL POINTS DRILLED AND TAPPED, SHIELDS AND HARDWARE ON MACHINE AND COLOR MATCHED- DRO FULLY MOUNTED AT FACTORY |
| CNC MOUNTING AND HARDWARE |
CNC FULLY WIRED AT FACTORY INCLUDING X, Y, Z AND A AXES ( A AXIS OUTPUT FOR THE OPTIONAL CNC ROTARY TABLE) |
| CNC ENCLOSURE |
ALL STEEL SHEET METAL HOUSING INTEGRATED INTO THE MACHINE DESIGN. GECKO DRIVE , RS 232 CONNECTIONS AND COOLING FAN INSTALLED IN USA SWING AWAY COMPUTER AND MONITOR MOUNT |
| BALL SCREWS |
C-7 BALL SCREWS WITH DOUBLE MULTI TRACK DEFLECTOR NUTS INSTALLED AT FACTORY ON X, Y AND Z AXES. |
| HAND WHEELS X, Y, Z |
ROUND WITH FOLD AWAY HANDLES FOR CNC PROGRAM RUNNING |
| MACHINE FASTENERS |
STEEL |
| MOTIONS |
ALL SPINDLES RUN ON ANGULAR CONTACT SEALED BALL BEARINGS, MOTORS RUN ON SEALED BALL BEARINGS. |
|
FEED RATES ON X AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
|
FEED RATE ON Y AXIS |
ADJUSTABLE 0-120 IPM UNDER CNC or Power feed |
|
FEED RATE ON Z AXIS |
ADJUSTABLE 0-100 IPM UNDER CNC or Power feed |