This CNC rotary table has the ability to tilt from 0 to 90 degrees for working compound angles. This is an excellent choice for the smaller mills like Grizzly etc. but is sufficient for machines like our Bridgemill and the Shopmaster-Shoptask machines. The footprint of the unit is 9" X 10" and the table height in horizontal position is 4.5"
THE CENTER HOLE IS MORSE # 2 and the table diameter is 4.3"
NOTE: The CNC function only controls the rotation of the table, the tilting function is manual. The stepper motor is cabled to plug into a Gecko G 540 drive. If you have a different system, you can remove the DB9 plug and wire the motor as required.