ER 25 COLLET CHUCK AND MOUNTING PLATE WITH 6 COLLETS

This ER 25 collet chuck is mounted on a special adapter plate to allow mounting to our 100325 and 100242 rotary tables.  It can also be mounted to a lathe held by a chuck or faceplate or directly to a mill table.  It will fit on any lathe chuck- 3 or 4 jaw , any

mill table and any rotary table from 4" diameter up to 6".  Comes with special spanner wrench, 4 T nuts and bolts and 6 collets  1/4, 5/16, 3/8, 7/16,, 1/2, 5/8

This is the ultimate collet set for all your lathe and mill operations. ER 25 collets are very common and available in many sizes in both inch and metric.  The maximum size of ER 25 collets is 1" or 26MM

NOTE:  PICTURES SHOWING ROTARY TABLE, MILL AND LATHE ARE FOR ILLUSTRATION ONLY, THEY ARE NOT INCLUDED.
Note: Fitting on larger mill tables or rotary tables may require larger T nuts and/or longer bolts.