5C COLLET ASSEMBLY for lathes
5 C Collets for use in the lathe
This is a set of tools for using 5C collets in the Shopmaster Mill Turn and Turnado machines. The set consists of 2 5C collet blocks, 1 square for use with a 4 jaw chuck and 1 hex for use with the 3 jaw chuck. There is a drawbar that fits through the spindle to tighten the collets using the external threads which has a knurled handwheel and a rotating sleeve so the drawbar can be loosened and tightened without friction against the end of the spindle.
Contains 3 basic collets 1/4, 1/2, 3/4.
The distance from the rotating bushing where it contacts the spindle to the end of the draw tube is 15"
The hole through the drawtube is 1"
The handwheel is 5.5" diameter
This set is designed to be used on the Shopmaster Mill Turn and Turnado machines, but could be adapted to other lathes with 1.5" spindle hole by shortening the draw tube.
For Shoptask, Shopmaster and other machines with the 1.0625" spindle bore, a draw tube for use with the 1" internal threads of the 5 C collet could be fabricated.
SECURELY PACKAGED FOR SHIPMENT BY PRIORITY MAIL FOR FAST DELIVERY
PLEASE SHOP OUR STORE FOR MORE FINE QUALITY TOOLS
10 other products in the same category: