MINI LATHE MILLING ATTACHMENT
A precision ground assembly made of the finest close grain cast iron machined and ground to perfection. This is a milling attachment for Mini Lathes. Remove your toolpost and attach this unit to the cross slide. Standing vertically, the milling attachment has a 2" X 3.75" sliding table with 2 T slots. The T slots are .25" wide at the top and .375" wide at the bottom. There are 2 movable vise jaws held to the table with T nuts and bolts. Each jaw can be moved along the table to adjust for various sized parts. One jaw has 3 clamp bolts to secure your part. The jaws can be removed and the T nuts can be used to secure odd shaped pieces directly to the table. The table also has 2 T slots along the side which are 0.115" at the narrow and 0.166" at the wide. The moving table travels on a precise dovetail with a brass gib strip with 3 adjusters. The table has a total travel of 2". Movement of the table is by a precision screw with a handle with 2 beautiful brass extensions. The dial has 50 increments each measuring 0.001" for a total of 0.50" per revolution.
Securely packaged and shipped immediately to you by priority mail.
PLEASE NOTE: This is a generic brand milling attachment. Some mini lathes have the slots for the included T-Nuts for mounting, but some may require drilling and tapping the mounting holes.
10 other products in the same category: