FIXTURE PLATE AND CHUCK ADAPTER FOR 5 AND 6" ROTARY TABLE
This fixture plate fits our 5" and 6" rotary tables and has a series of 8 MM X 1.25 threaded holes for mounting all parts that may not fit into a chuck.
I comes with 4 T Nuts and bolts to attach it to the rotary table and on the underside it has a round boss to center it on the table. The centering boss is 0.70" diameter.
T nuts are 13 MM square at the base and 8mm at the slot threaded for 6mm bolts
The plate also has 2 hole patterns ( see circled pictures) for mounting our 5" 3 jaw scroll chuck #145060 and our 5" 4 jaw independent chuck# 146060 and our 4" 3 jaw scroll chuck # 145050
The threaded holes are 8MM X 1.25 threads and the plate is 127 MM diameter (5") and is 14 mm thick made of 6061 aluminum.
With this plate you will never have to waste time adapting any chuck or part to your rotary table.
6 other products in the same category: